HP ProLiant SL270s Gen8 SE Server - Manual (Page 42)

Hardware options installation 42
10. Connect all internal or external cabling to the installed board.
11. Install the GPU cage (on page 23 ).
12. Install the SFF hot-plug drive cage (" Install the hot-plug SFF drive cage " on page 17 ).
13. Install the shipping brackets (" Install the shipping brackets and shipping plates " on page 19 ).
14. Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
15. Connect the peripheral cables.
16. Power up the server (on page 15 ).
Mini-SAS Y-cable option
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).
4. Remove the shipping brackets and shipping plates (on page 17 ).
5. Remove the SFF hot-plug drive cage