HP LaserJet M1005 Multifunction Printer series User Manual
Page 53
To adjust the copy quality for the current job
1.
On the device control panel, press
More Copy Settings
twice to see the current quality setting for
the copy.
2.
Use the
<
or the
>
button to scroll through the quality setting options.
3.
Select a setting, and then press
Start Copy
to save the selection and immediately start the copy
job, or press
Menu/Enter
to save the selection without starting the job.
NOTE:
The change in the setting remains active for about two minutes after the copy job has
been completed. During this time, Settings=Custom appears on the device control-panel display.
To adjust the default copy quality
1.
On the device control panel, press
Menu/Enter
.
2.
Use the
<
or the
>
button to select Copy setup, and then press
Menu/Enter
.
3.
Press
Menu/Enter
to select Default Quality.
4.
Use the
<
or the
>
button to scroll through the choices.
5.
Press
Menu/Enter
to save the selection.
ENWW
Adjusting the copy quality
43