HP Scanjet Enterprise Flow 5000 s2 Sheet-feed Scanner User Manual
Page 37
5.
Using an HP paper path cleaning cloth or a clean, lint-free cloth moistened with distilled water or clean
tap water, wipe the feed rollers on both sides of the open hatch.
Wipe the rollers from the top down, rotating the rollers a full 360 degrees to ensure that you wipe the
complete surface.
CAUTION:
Wait two minutes for the feed rollers to dry before loading documents into the document
input tray.
6.
Close the roller covers on the front and rear of the open document feeder hatch.
a.
Close the bottom roller cover on the rear of the hatch, pressing firmly until you hear a click.
b.
Close the top roller cover on the rear of the hatch (this cover does not click into place).
c.
Close the roller cover on the front of the hatch, pressing firmly until you hear a click.
7.
Close the document feeder hatch, and then reconnect the USB cable and power supply to the scanner.
8.
Press the Power ( ) button to turn on the scanner, and then update the scanner maintenance history.
a.
Press the Tools ( ) button to open the HP Scanner Tools Utility.
b.
Under Record Cleaning Rollers, click Record Cleaning to log this cleaning activity and update the
roller cleaning history.
For more information, see the HP Scanner Tools Utility Help.
ENWW
Clean the rollers
31