Resetting the printer to the factory defaults – HP Deskjet 6620 Color Inkjet Printer User Manual
Page 29
Use the printer's EWS to do the following:
• Check the printer's status.
• Adjust the printer's network configuration.
• Check estimated ink levels in the print
cartridges.
• View network statistics.
• Visit HP's Web site for support information and
to purchase supplies.
Caution: It is recommended that the printer and the computers that use it be
on the same subnet. Printer installation across subnets can be problematic
depending on the type of router used.
Before using the EWS, verify that the printer and the computer are powered on and
connected to the network.
Follow these steps to open the EWS:
1. Launch your Internet browser.
Use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or higher.
2. Enter either the printer's
in the browser's address box.
Note: If the printer is on a different
than your computer, enter the printer's
IP address (for example: http://15.252.32.234) in the browser's address
box to open the embedded Web server. Also, if your computer uses a proxy
server to access the Internet, you might need to configure your browser to
by-pass the proxy server in order to access the EWS.
If you don't know the printer IP address or host name,
.
Note: For instructions on using the printer's EWS, see the online help. To open
the online help, click Help under the Other Links heading.
Caution: If you lose your connection, you may need to use the new settings
to reconnect. If the printer loses its network connection, you may need to
reset it to factory defaults and reinstall the software.
4.2.11 Resetting the printer to the factory default settings
Once the printer is configured for a network, its configuration settings are saved in
its memory.
HP Deskjet 6600 series printer
29