HP 3Gb SAS Switch for HP BladeSystem c-Class User Manual
Page 32
Advertising
c.
After a moment, the display is refreshed. All items affected by the change (the zone group
and the server device bay) are marked in the navigation tree. Click Save Changes.
When the save is complete, the entry in the navigation tree is updated.
NOTE:
The zone group entry in the navigation tree now states “Assigned”.
NOTE:
For illustration purposes, in this example, Save Changes was performed after
each configuration task. When performing multiple configuration tasks, HP recommends
completing all tasks and then committing all pending changes at one time.
4.
Repeat steps 2 and 3 to create additional zone groups and assign them to server device bays.
32
Example: Configuring zoned SAS storage enclosures
Advertising