Product information – HP Z230 Tower-Workstation User Manual
Page 10
Product information
Topic
Location
Technical specifications
See
www.hp.com/go/quickspecs
. In the left pane, select your region and then select
Workstations.
HP Cool Tools (Windows® 7
only)
Most HP workstations with the Windows 7 operating system are preloaded with tools
that may enhance system performance and with additional software that is not
automatically installed during first boot. To access these applications:
●
Click the HP Cool Tools icon on the desktop, or
●
Open the HP Cool Tools folder by selecting Start > All Programs > HP >
HP Cool Tools.
To learn more about these applications, click HP Cool Tools—Learn More.
To install or launch the applications, click the appropriate application icon.
Additional information is located in the Maintenance and Service Guide for your
workstation on the web at
.
Regulatory information
Refer to the Regulatory Safety & Environmental Notices for product regulatory
information. You can also refer to the regulatory label on the workstation chassis.
Accessories
For complete and current information about supported accessories and components,
see
System board
A diagram of the system board is located on the inside of the side access panel
(tower and desktop configurations) or on the inside of the chassis (all-in-one
configurations). Additional information is located in the Maintenance and Service
Guide for your workstation on the
Serial number, Certificate of
Authenticity (COA) labels, and
Genuine Microsoft Label (GML) (if
applicable)
Serial number labels are on the top or back panel (tower and desktop
configurations). The COA (Windows 7) label and GML (Windows 8) are typically
located near the serial number label. Some workstations have this label on the bottom
panel.
Linux
For information about running Linux on HP workstations, see
hen select Linux on Workstations from the list on the left.
2
Chapter 1 Locating HP resources