Configuring connection settings, Connection settings – HP Storage Mirroring Software User Manual
Page 212
210 of 739
1. To enable snapshots, select the Enable periodic snapshots checkbox. This will
enable the remaining controls.
2. In the Snapshot interval field, select the interval at which you want to perform
snapshots (in minutes). The minimum interval is 15 minutes.
3. Select one of the following options for when to begin collecting snapshots:
●
Start now—Select this option to take the first snapshot as soon as protection
is enabled.
●
Start at—Select this option to start taking snapshots at a future time. If you
select this option, you will also need to enter a date and time.
4. When you are finished, click OK.
Next step:
Configuring connection settings
If you have not done so already, launch the
Protecting a File Server workflow
.
The Connection tab includes options that will be applied to the specified source/target
connection.
The following topics explain how to configure the options on the Connection tab:
Route
This setting identifies the Target IP Address that the Storage Mirroring Recover data
will be transmitted through. You should only change this setting if you want to select a
different route for Storage Mirroring Recover traffic. On a machine with more than one