Recording a video – HP HD 3300 Webcam User Manual
Page 10
8
HP Webcam HD User Guide
Recording a video
1
Do either of the following to open ArcSoft WebCam Companion and enter capture mode:
Press the Video Record
button on your webcam.
Double-click the HP Webcam Control Center
icon on the Windows desktop, and
then click Take Video or Photo
.
2
(Optional) Click Full Screen
to record in full-screen mode.
3
(Optional) Click the resolution list below the icons in the upper-right corner, and select the
resolution setting you want to use for the recording. The default setting is 1280x720 (HD
720p), which provides optimum performance in most environments.
4
Press the Video Record
button on the webcam or click Record Video
to
begin recording.
5
Press the Video Record
button on the webcam again or click Stop Recording
to
stop recording and save the video to your computer.
6
If recording in full-screen mode, click the Exit
icon on the right side of the screen to
return to partial-screen mode.
To learn more about using ArcSoft WebCam Companion, click Extras and select Application
Help.
NOTE: Higher resolutions and/or poor lighting may slow down the frame rate and make the
video jerky. For more information on resolution issues, see “Troubleshooting.”