HP D2200sb Storage Blade - Manual (Page 24)

Configuration and utilities 24
• Setting the controller to be the boot controller
• Selecting the boot volume
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding the default configurations that ORCA uses, see the HP ROM-Based Setup
Utility User Guide on the Documentation CD.
For more information about the controller and its features, see the HP Smart Array Controllers for HP ProLiant
Servers User Guide on the HP website
( http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01608507/c01608507.pdf ). To
configure arrays, see the Configuring Arrays on HP Smart Array Controllers Reference Guide on the HP
website
( http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf ).
Management tools
HP Systems Insight Manager
HP SIM is a web-based application that allows system administrators to accomplish normal administrative
tasks from any remote location, using a web browser. HP SIM provides device management capabilities that
consolidate and integrate management data from HP and third-party devices.
IMPORTANT: You must install and use HP SIM to benefit from the Pre-Failure Warranty for
processors, SAS and SATA hard drives, and memory modules.
For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or the
HP SIM website ( http://www.hp.com/go/hpsim ).
Management Agents
Management Agents provide the information to enable fault, performance, and configuration management.
The agents allow easy manageability of the server through HP SIM software, and third-party SNMP
management platforms. Management Agents are installed with every SmartStart assisted installation or can
be installed through the HP PSP. The Systems Management homepage provides status and direct access to
in-depth subsystem information by accessing data reported through the Management Agents. For additional
information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or the HP website
( http://www.hp.com/servers/manage ).
Diagnostic tools
Array Diagnostic Utility
The HP Array Diagnostics Utility is a web-based application that creates a report of all HP storage controllers
and disk drives. This report provides vital information to assist in identifying faults or conditions that may
require attention. ADU can be accessed from the SmartStart CD or downloaded from the HP website
( http://www.hp.com ).