HP XP P9500 Storage - Manual (Page 576)

6. From the primary site, execute the YKQUERY command for the primary-to-remote EXCTG, and
check the EXCTG status.
•
YKQUERY
7. If the EXCTG remains, from Storage Navigator, forcibly delete the journal groups for the
remote site storage systems in which the failure has not occurred.
8. From the primary site, execute the YKMAKE SELECT(COND) command for the primary-to-remote
EXCTG.
The primary-to-remote Cnt Ac-J Z copy pair whose S-VOL is located in the storage system in
which the failure occurred is created again. Also, the journal group defined as a Cont AC-J
Z EXCTG is registered as an EXCTG of the storage system again.
576 Maintenance and troubleshooting operations