HP Deskjet 5440 Photo Printer - Manual (Page 72)

2. Slide the paper forward until it stops.
3. Slide the paper guide firmly against the edge of the paper.
Do not press the guide so firmly against the paper that the paper bends or curls.
Check the printer properties
Open the
Printer Properties dialog box and verify the following options:
Tab Setting
Paper/Quality
Size is: An appropriate paper size
Type is: An appropriate photo paper
Print Quality: Best or Maximum dpi
Colors are tinted or incorrect
If colors in photos appear tinted or incorrect, follow these steps:
1.
Verify that neither print cartridge is low on ink .
If neither print cartridge is low on ink, proceed to step 2.
2. Align the print cartridges.
3. Reprint the photo.
4. If colors are still tinted or incorrect, calibrate the color .
Both a photo print cartridge and a tri-color print cartridge must be installed for
color calibration.
5. Reprint the photo.
6. If colors continue to appear tinted or incorrect, open the Printer Properties dialog
box, click the Color tab, and then click the Advanced Color Settings button.
7. Adjust the colors by using the Advanced Color Settings dialog box.
Horizontal lines appear on a photo
If light or dark horizontal lines appear on photos, follow this procedure:
1.
Clean the print cartridges.
2. Reprint the photo.
3. If horizontal lines still occur, perform a print quality calibration .
Chapter 11
70 HP Deskjet 5400 series