HP Deskjet F4210 All-in-One Printer - Manual (Page 58)

computer, look for the HP Digital Imaging Monitor icon in the system tray at the lower
right side of the screen, near the time.
NOTE: Closing the HP Digital Imaging Monitor icon in the Windows system tray
can cause the HP All-in-One to lose some of its scan functionality. If this happens,
you can restore full functionality by restarting your computer or by starting the
HP Photosmart Software.
The HP Photosmart Software that you installed on your computer has many tools that
you can use to edit and print your scanned image. You can improve the overall image
quality by adjusting the brightness, sharpness, color tone, or saturation. You can also
crop, straighten, rotate, or resize the image. When the scanned image looks just the way
you want it, you can open it in another application, send it through e-mail, save it to a file,
or print it.
To scan to a computer
1. Load your original print side down on the right front corner of the glass.
2. Click the HP Digital Imaging Monitor icon.
3. Scan the image using the HP Solution Center software installed on your computer.
A preview image of the scan appears on your computer, where you can edit it. Any
edits that you make apply to the current scan session only.
4. Make any edits to the preview image, and then click Accept when you are finished.
Related topics
“Control panel buttons” on page 10
Chapter 9
56 Use the scan features
Scan