HP Deskjet F4210 All-in-One Printer User Manual
Page 73
Advertising
7.
Clean only the copper-colored contacts. Allow the print cartridges to dry for
approximately ten minutes.
1 Copper-colored contacts
2 Ink nozzles (do not clean)
8.
Hold the print cartridge with the HP logo on top, and insert the print cartridge back
into the slot. Make sure you push the print cartridge in firmly until it snaps into place.
9.
Repeat if necessary for the other print cartridge.
10.
Gently close the print cartridge door and plug the power cord into the back of the
product.
Related topics
•
“Clean the area around the ink nozzles” on page 72
•
“Replace the print cartridges” on page 64
Work with print cartridges
71
Maintain the H
P
A
ll-in-One
Advertising