HP ProLiant SL390s G7 Server - Manual (Page 36)

Hardware options installation 36
3. Remove the server from the chassis (" Removing the server from the chassis " on page 18 ).
4. Open the DIMM slot latches.
5. Install the DIMM.
6. Install the server into the chassis (" Installing the server into the chassis " on page 23 ).
7. Connect the peripheral devices to the server.
8. Power up the server (" Powering up and configuring the server " on page 25 ).
Expansion board options
The server supports PCI, PCI-X, and PCI Express expansion boards.
Installing a low-profile expansion board
1. Power down the server (on page 18 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (" Removing the server from the chassis " on page 18 ).