HP XP7 Storage - Manual (Page 29)

5. In the dialog box, enter the certificate file for HCS (.crt file) in the Certificate file (.crt file) box.
You can enter the file name directly or by clicking Browse and searching for the file name.
6. Click Register. The execution confirmation dialog for Set or Delete Certificate File for HCS
opens.
7. Click OK to register the certificate. Registration of the certificate starts.
When the certificate is registered, the registration completion dialog box for Set or Delete
Certificate File for HCS opens.
8. In the registration completion dialog box for Set or Delete Certificate File for HCS, click OK.
The display returns to the login dialog box.
NOTE: If an error occurs during registration of the certificate for HCS, an error message displays.
Resolve the problem and then run the procedure again, starting with logging in, to Set or Delete
Certificate for HCS.
NOTE: If the Security Alert dialog box for the certificate opens at other times, click View Certificate
to confirm that the certificate is correct and then click Yes.
Related Topics
•
“Set or Delete Certificate File for HCS window” (page 253) .
•
“Deleting certificates for HCS” (page 29) .
Notes on registering certificates for HCS
Read the following notes about registering certificates for HCS:
•
Ensure that the certificate to be registered is the right one. If you register a wrong certificate,
HCS external authentication is not performed.
•
Only with registration or deletion of the correct certificate, HCS external authentication operates
normally
Deleting certificates for HCS
You can delete the certificates you registered in the procedure of the "Registering certificates for
HCS" section. Once you delete a certificate, server, reliability for that certificate is not checked by
SSL communication for HCS external authentication.
Prerequisites
•
You must have Security Administrator (View & Modify) role to perform this task.
To delete certificates for HCS:
1.
Close all Remote Web Console sessions on the SVP.
2. On the Remote Web Console computer, open a web browser and enter the following URL to
open the Tool Panel dialog box.
http://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
Configuring certificates for HCS 29