HP LaserJet 4050 Printer series - Manual (Page 51)

EN
Chapter 1: Printer Basics 29
Software for Networks
HP JetAdmin
HP JetAdmin software is primarily for users who cannot use
HP Web JetAdmin due to the lack of browser access or because
none of the supported server platforms exist on their network.
HP JetAdmin should be installed only on the network
administrator’s computer. HP JetAdmin can be accessed by clicking
the Start button (point to Settings, click Control Panel, and then
click the HP JetAdmin icon) in Windows 9x and Windows NT 4.0;
or from the HP LaserJet program group folder. Use HP JetAdmin
software to do the following:
•
Install, configure, and manage printers that are connected to a
network with an HP JetDirect print server.
•
Manage and troubleshoot network HP printers and print
servers.
HP JetAdmin software works on the following network systems:
•
Microsoft Windows NT 4.0
•
Microsoft Windows 9x
•
Microsoft Windows NT 3.51*
•
Novell NetWare
•
HP-UX*
•
Solaris*
•
SunOS*
•
IBM OS/2*
•
Mac OS (via the HP LaserJet Utility)
*The software for these systems is not included on the compact disc
with the printer, but is available from the Internet. If you do not have
access to the Internet, see the HP Customer Care Service and
Support pages at the front of this user’s guide to obtain this software.
Note Network Administrators: If the printer is attached to a network,
before you can print, the printer must be configured for that network
using HP JetAdmin or similar network software. (See the getting
started guide.)