HP ProLiant DL360p Gen8 Server - Manual (Page 42)

Hardware options installation 42
b. Secure the locking latches.
o For fans without latches, install the fans into slots 1 and 2.
16. Install the access panel (on page 23 ).
17. Slide the server into the rack.
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server (on page 20 ).
Memory options
IMPORTANT: This server does not support mixing LRDIMMs, RDIMMs, or UDIMMs. Attempting
to mix any combination of these DIMMs can cause the server to halt during BIOS initialization.
The memory subsystem in this server can support LRDIMMs, RDIMMs, or UDIMMs: