HP StorageWorks XP Remote Web Console Software - Manual (Page 64)

◦ Operation: Operations are:
– Pairing Start: Add pair operation was started.
– Pairing Complete: Add pair operation was completed.
– Pair Delete: Pair was deleted.
– Suspend Operation: Pair suspending operation was performed.
– Pair Suspend (Failure): Pair was suspended because of a failure.
– Pair Resync. Start: Resume pair operation was started.
– Pair Resync. Complete: Resume pair operation was completed.
◦ VOL: CU number and LDEV number of operated volume.
◦ Paired VOL: CU number and LDEV number of paired volume.
◦ Copy Time: Time taken for operation (from start of operation to end). Displayed only for
Pairing Complete and Pair Resync. Complete operations.
NOTE: For XP Continuous Access pairs consisting of LUN Expansion (LUSE) volumes, number
of Pair Suspend (Failure) rows in the history list does not correspond to number of LDEVs in
the LUSE volume. For LUSE volumes with three or more LDEVs, only two rows showing Pair
Suspend (Failure) are displayed.
•
Previous and Next buttons: Displays up to a maximum of 16,384 operations at one time. Use
these buttons to display the previous or next 16,384 operations.
Dates and times displayed on the History pane are the disk array's date and time, which may or
may not correspond to the local time or host time.
Other Operation pane
The Other Operation pane is used to change subsystem option settings.
The Other Operation pane is updated when the tab is switched from one to another, Refresh is
clicked, and settings are applied.
Figure 29 Other Operation pane
64 Starting XP Continuous Access