HP StorageWorks XP Remote Web Console Software User Manual
Page 99
◦
Suspended by: Consistency status (group or LU) of split or suspended XP Continuous
Access Async pair (see
“XP Continuous Access volume pair status” (page 23)
) (displayed
only at the RCU).
◦
Consistency time: Consistency time of group to which XP Continuous Access Async pair
is assigned.
•
Refresh the Pair Operations pane after this pane is closed check box: To refresh the Pair
Operations pane after closing the Pair Status pane, select the check box. By default, the check
box is not selected.
•
Previous button: Changes displayed pair status information to the previous LU on the Volume
list (the LU of the row above).
•
Next button: Changes displayed pair status information to the next LU on the Volume list (the
LU of the row below).
•
Refresh button: Refreshes pair status information.
•
Close button: Closes the Pairdisplay pane.
NOTE:
Display Filter settings can affect how the Previous or Next button is recognized. The
Volume list can display 256 rows at one time. Use the Previous and Next buttons to display the
previous or next 256 rows.
Creating XP Continuous Access volume pairs (Paircreate)
Use the Paircreate command to create one or more XP Continuous Access pairs. When the Paircreate
command is selected, the Paircreate pane appears. Use the Paircreate pane to select the S-VOL,
RCU, and initial copy options for pairs being created.
NOTE:
Select the appropriate CU image before creating XP Continuous Access pairs.
Figure 51 Paircreate (Synchronous) pane
Creating XP Continuous Access volume pairs (Paircreate)
99