HP 2310mfd 23 inch Diagonal LCD Monitor - Manual (Page 33)

31
FEATURES MENU •
The Features menu in TV mode, shown below,
gives the most flexibility for general demands. The
various requirements in different source modes,
allow some features to be hidden (disable) on the
menu.
Picture
OSD Language
Time Setup
Reset Default English
Enter Select Watch TV EXIT OK
Sound
TV
Features
Parental
OSD Language: 1. To select the on-screen
display menu language.
Time Setup:
2.
Time Zone • - To select the time zone
you are in.
Time
• - To set the time and date or select
auto synchronization.
Tip:
Before you want to set the time •
and date manually make sure Auto
synchronization is Off.
Sleep Timer • - To set the MFM to turn
itself off within a certain time.
Reset Default: 3. To reset all MFM settings to
the original factory values.
PARENTAL MENU •
The Parental Menu enables and defines parental
controls for the MFM.
Picture
Channel Block
Programme Block
Input Block
Factory Default
Change Password
Enter Select Back EXIT OK
Sound
TV
Features
Parental
Channel Block: 1. To block certain MFM
channels.
Programme Block:
2. To control access
programmes based on age ratings. All
settings apply to digital channels.
Note:
This function operates according to •
information from the broadcasting station.
Therefore if the signal has no information,
this function does not operate.
Input Block: 3. To disable the specific
external input signals.
Change Password:
4. To set or change your
password, follow the on-screen instructions
to set it your password in. All number
combinations from 0000 to 9999 are valid.
Tip:
Remember that 5351 is the default •
Change Password code. If your access
code has been changed or you have
forgotten the code, you can always get in
by inputting the default code.
Factory Default: 5. To clear all the settings in
the parental submenu.