HP Designjet T610 Printer series - Manual (Page 138)

● The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1. Reseat the printheads by removing them and then reinserting them. See Remove a printhead
on page 90 and Insert a printhead on page 93 .
2. Align the printheads. See Align the printheads on page 146 .
Lines are discontinuous
If your lines are broken in the following way:
1. Check that you are using appropriate print-quality settings. See Printing on page 47 .
2. Reseat the printheads by removing them and then reinserting them. See Remove a printhead
on page 90 and Insert a printhead on page 93 .
3. Align the printheads. See Align the printheads on page 146 .
128 Chapter 13 Troubleshooting print-quality issues ENWW
Print-q
u
ality issu
es