HP Designjet T610 Printer series User Manual
Page 37
Advertising
1.
Remove the spindle from the printer one end at a time.
WARNING!
Do not insert your fingers into the spindle supports during the removal process.
2.
The spindle has a stop at each end to keep the roll in position. The blue stop can be removed to
mount a new roll; it slides along the spindle to hold rolls of different widths. Remove the blue paper
stop from the end of the spindle.
3.
If your roll has a three-inch cardboard core, ensure that the core adaptors supplied with the printer
have been installed.
4.
If the roll is long; rest the spindle horizontally on a table and load the roll on the table.
ENWW
Load a roll onto the 24-inch spindle
27
Paper handling
Advertising