HP MPX200 Multifunction Router - Manual (Page 178)

B–Log Messages
B-18 ISR654602-00 H
102657 #%d: QLInitializeAdapter: Load RISC code
failed FC Fatal Fibre Channel processor firmware load failed.
102658 #%d: QLInitializeAdapter: Load ISP2322
receive sequencer code failed FC Fatal Fibre Channel processor receive sequencer code
load failed.
102659 #%d: QLInitializeAdapter: Load ISP2322
transmit sequencer code failed FC Fatal Fibre Channel processor transmit sequencer code
load failed.
102662 #%d: QLInitializeAdapter: Verify Check-
sum command failed (%x) FC Fatal Fibre Channel processor firmware checksum failed.
102680 #%d: QLInitializeFW: FAILED FC Fatal Fibre Channel processor firmware initialization failed.
102688 #%d: QLInterruptServiceRoutine: Risc
pause %x with parity error hccr %x, Dis-
able adapter FC Fatal Fibre Channel processor paused due to internal par-
ity error.
102689 #%d: QLInterruptServiceRoutine: Invalid
interrupt status: %x FC Fatal Fibre Channel processor returned an invalid interrupt
status.
102716 #%d: QLIsrEventHandler: System error
event (%x), MB1=%x, MB2=%x, MB3=%x,
MB4=%x, MB5=%x, MB6=%x, MB7=%x FC Fatal Fibre Channel processor system error.
102746 #%d: QLProcessResponseQueue: Invalid
handle %x, type %x FC Fatal Response queue entry contains an invalid handle.
102752 #%d: QLTimer: Ext Ram parity error exceed
limit cnt 0x%x, limit 0x%x, Disabled
adapter FC Fatal Fibre Channel processor external SRAM parity error
count exceeded limit; Fibre Channel port disabled.
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description