HP MPX200 Multifunction Router - Manual (Page 26)

1–Getting Started
Connecting SANsurfer Router Manager to the Router
1-6 ISR654602-00 H
Starting SANsurfer Router Manager on Linux or Solaris
On Red Hat/SUSE Linux and Solaris SPARC/x86 systems, follow these steps to
start SANsurfer Router Manager.
To start SANsurfer Router Manager on Linux or Solaris:
1. Ensure that you are in a graphical user environment, such as Xwindows.
2. Open a command terminal.
3. Change to the directory where you installed SANsurfer Router Manager.
4. Type SANsurferRouterManager, and then press ENTER.
The SANsurfer Router Manager main window opens (see “Main Window” on
page 2-2 ).
Starting SANsurfer Router Manager on Macintosh
On Macintosh systems, follow these steps to start SANsurfer Router Manager.
To start SANsurfer Router Manager on Macintosh:
1. Open Finder.
2. Browse to the folder where you installed SANsurfer Router Manager.
3. Double-click the SANsurfer Router Manager icon:
The SANsurfer Router Manager main window opens (see “Main Window” on
page 2-2 ).
Connecting SANsurfer Router Manager to the
Router
Follow the steps in this section to connect SANsurfer Router Manager to the
iSR6200 router.
To connect SANsurfer Router Manager to the iSR6200:
1. Open the Connect to Router dialog box using any of the following methods:
 On the toolbar, click Connect: