Connecting to the network, Installing a server blade – HP ProLiant BL490c G7 Server-Blade User Manual
Page 17
Advertising
Setup 17
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network interconnect
devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
Installing a server blade
CAUTION:
To prevent improper cooling and thermal damage, do not operate the enclosure
unless all bays are populated with a component or a blank.
1.
Remove the device bay blank.
Advertising