HP Officejet 6210v All-in-One Printer - Manual (Page 99)

Fax over the Internet
You may subscribe to a low cost phone service that allows you to send and receive
faxes with your HP all-in-one by using the Internet. This method is called Fax over
Internet Protocol (FoIP). You probably use a FoIP service (provided by your telephone
company) if you:
●
Dial a special access code along with the fax number, or
● Have an IP converter box that connects to the Internet and provides analog
phone ports for the fax connection.
Note You can only send and receive faxes by connecting a phone cord to the port
labeled "1-LINE" on the HP all-in-one and not from the Ethernet port. This means that
your connection to the Internet must be done either through a converter box (which
supplies regular analog phone jacks for fax connections) or your telephone company.
The FoIP service might not work properly when the HP all-in-one is sending and
receiving faxes at high speed (33600bps). If you experience problems sending and
receiving faxes, use a slower fax speed. You can do this by changing the
Fax Speed
setting from High (the default) to Medium . For information on changing this setting,
see Set the fax speed .
You should also check with your telephone company to make sure their Internet
phone service supports faxing. If they do not support faxing, you will not be able to
send and receive faxes through the Internet.
Stop faxing
You can cancel a fax you are sending or receiving at any time.
To stop faxing from the control panel
➔ Press
Cancel on the control panel to stop a fax you are sending or receiving.
Look for the Fax Cancelled message on the control panel display. If it does not
appear, press Cancel again.
The HP all-in-one prints any pages it has already started printing and then
cancels the remainder of the fax. This can take a few moments.
To cancel a number you are dialing
➔ Press
Cancel to cancel a number you are currently dialing.
Chapter 11
96 HP Officejet 6200 series all-in-one