HP Surestore NAS - Manual (Page 41)

Mounting or Mapping Network Drives 4-9
9. Select a drive letter for your CD-ROM server.
10. Check Reconnect at logon if you wish to use the CD-ROM
server under the same drive letter the next time you start your
computer.
11. Click the OK button. The CD-ROM server is ready for use.
Windows for
Workgroups
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive… The
following screen is displayed. If you also have Microsoft
Network installed, you may have to click the button labelled
‘NetWare…’ to display the screen.
3. Click the Select NetWare Connection button on the toolbar.
4. Select the entry for your new CD-ROM server. The default
name is
HP hhhhhh_NW , where hhhhhh are the last six digits of
the CD-ROM server LAN hardware (MAC) address.
5. Click the Login button.
6. If you are using Bindery mode you will be prompted to enter
your user name and password, unless you are already logged
in. Before the CD-ROM server has been set up, all users have
full access to it.
hp.book Page 9 Thursday, April 2, 1998 4:33 PM