HP Surestore NAS - Manual (Page 51)

Mounting or Mapping Network Drives 4-19
3. From the Connection menu, select Create. The following
dialog is shown:
4. In the Workstation field, enter HP hhhhhh, where hhhhhh are
the last six digits of your CD-ROM server’s LAN hardware
address.
5. In the Share/alias field, enter the name of the CD-ROM server
folder or an individual CD-ROM:
• To map at the root level, type root .
• To map the CD-ROMs at the cd folder level, type cd .
• To map an individual CD-ROM, type the volume name
(for example
cd_12345) .
6. In the Local device name field, select a drive letter to map to.
7. Click Create. The CD-ROM server is ready for use.
Note ❏ The CD-ROM server folders will not be visible on the
Desktop in OS/2 versions prior to OS/2 WARP Connect. If
you wish to use an earlier version of OS/2, we recommend
using third-party NFS software to connect to the CD-ROM
server.
hp.book Page 19 Thursday, April 2, 1998 4:33 PM