Step 7: connect power – HP Surestore 2.15 Tape Library User Manual
Page 39
Advertising
2-13
Library Installation
Step 7: Connect Power
L
ib
r
a
r
y
Ins
ta
lla
tio
n
Step 7: Connect Power
1. Plug the power cord into a proper outlet.
2. Turn on the power switch.
SELF TEST
and
NOT READY
, and then
NOT READY
and
INVENTORY
CHECK
display alternately. After the power-on test completes (in about 3
minutes), the drive status information displays. (See “Understanding the
Display Window” on page 4-4.)
NOTE
If the drive status information does not display, the power-on test was not
successful and
DEVICE FAILED
displays. See “resolving Other Problems”
on page 4-43.
3. Turn on the host system.
Advertising