HP TouchSmart 9100 All-in-One-PC - Manual (Page 20)

14 User Guide (Features may vary by model)
Keyboard and Mouse
Your keyboard and mouse can be connected to any USB connector on the lower left side or back side of
HP TouchSmart 9100 Business PC. See “Back Side of the HP TouchSmart 9100 Business PC” in this
chapter for illustration.
Wireless Keyboard and Mouse
An optional wireless keyboard and wireless mouse are available on select models. To set up the wireless
keyboard and mouse, remove the battery tabs on both the keyboard and the mouse. Also, make sure the
Power switch on the bottom of the mouse is in the On position (the keyboard does not have a Power
switch). Then, turn on the computer. If you have trouble using the keyboard and mouse, manually
synchronize them as explained in the next procedure.
The keyboard is designed to fit under your computer when not in use. Your product may vary from the one
shown here. The wireless receiver shown here is preinstalled in the computer.
Synchronizing the wireless keyboard or mouse
The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your
HP TouchSmart PC. The keyboard and mouse should work immediately after you first pull the battery tabs
to activate the preinstalled batteries, and then turn on the mouse (2).
You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.
To synchronize them:
IMPORTANT: For better mouse battery life and performance, avoid using your mouse on a dark or
high-gloss surface, and turn mouse power off when not in use.