HP TouchSmart 9100 All-in-One-PC User Manual
Page 26
20
User Guide (Features may vary by model)
To connect a TV signal to the computer, your computer needs a TV tuner, which is included with select
models only. You also may need to purchase some cables separately.
Connect the coaxial cable from your TV antenna or TV cable provider to the TV In connector (A) located on
the back of the computer behind the connector cover. See “Back of the HP TouchSmart 9100 Business PC”
on page 8.
Using a set-top box with Windows Media Center
(optional step)
Sold separately
Refer to your set-top box documentation for more details.
1 Connect an S-Video cable to the S-Video In connector (A), located on the back of the computer behind
the connector cover. Connect the other end of the cable to your set-top box.
NOTE: Availability of signals is limited by the strength and accessibility of the originating TV signal,
location and other factors. Performance issues may arise, and do not constitute defects in the product.
WARNING: Norway and Sweden only: Cable grounding notice for products with a TVB tuner.
Your TV tuner requires that you use a TV tuner isolator (adapter) (purchased separately) with
your computer to connect a coaxial cable to the TV signal source. Using the TV tuner adapter
helps prevent personal injury and computer damage from surges on the coaxial line.
A