HP SAN - Manual (Page 13)

3 Using SAN Visibility
This chapter addresses the following topics:
• SAN Visibility GUI
• Using SAN Visibility
The following procedure provides a brief overview of using HP StorageWorks SAN Visibility:
1. Specify the SAN details.
2. Specify the switch details.
3. Specify the host details.
4. Specify your contact information.
5. Run data collection.
6. Email the data collected (with .hp extension) to HP at: “[email protected]” for analysis.
HP sends back the processed report consisting of SAN topology diagram, SAN inventory, and
recommendations by email.
SAN Visibility GUI
Launch the HP StorageWorks SAN Visibility software by double-clicking the SAN Visibility shortcut
icon on the desktop.The HP StorageWorks SAN Visibility welcome screen is displayed, as shown in
Figure 1 .
Figure 1 SAN Visibility welcome screen
.
Click OK to view the SAN Visibility GUI.
Following are the display areas in the SAN Visibility GUI, as shown in Figure 2 :
• A — Navigation area
HP StorageWorks SAN Visibility 5.1 User Guide 13