Checklists for cluster server installation, Network requirements – HP ProLiant SB460c SAN Gateway Storage Server User Manual

Page 97

Advertising
background image

2.

On the left side of the window, select Add/Remove Windows Components. The Windows
Components Wizard appears.

3.

Select Other Network File and Print Services and click the Details button. The Other Network File
and Print Services window is displayed.

4.

Uncheck the Microsoft Services for NFS subcomponent.

5.

Click OK, then Next, followed by Finish.

NOTE:

Uninstalling Microsoft Services for NFS removes two primary services:

Server for NFS

User Name Mapping

After setting up clustering, should you choose to reinstall Microsoft NFS, follow these steps:

1.

Select Start > Settings > Control Panel > Add or Remove Programs. The Add or Remove Programs
window is displayed.

2.

On the left side of the window, select Add/Remove Windows Components. The Windows
Components Wizard appears.

3.

Select Other Network File and Print Services and click the Details button. The Other Network File
and Print Services window is displayed.

4.

Check the Microsoft Services for NFS subcomponent.

5.

Click OK, then Next, followed by Finish.

6.

After NFS is installed, you can view the details of the Microsoft Services for NFS subcomponent
to see which of its subcomponents were installed. The subcomponents listed below are preinstalled
at the factory. Verify that the Server for NFS and User Name Mapping services have been
reinstalled.

• Microsoft Services for NFS Administration
• RPC External Data Representation
• RPC Port Mapper
• Server for NFS
• Server for NFS Authentication
• User Name Mapping

Checklists for cluster server installation

These checklists assist in preparing for installation. Step-by-step instructions begin after the checklists.

Network requirements

A unique NetBIOS cluster name

For each node deployed in the cluster the following static IP addresses are required:
• One for the network adapters on the private network
• One for the network adapters on the public network
• One for the virtual server itself
A single static cluster IP address is required for the entire cluster.

HP ProLiant SB460c SAN Gateway Storage Server

97

Advertising