HP ProLiant ML310 G5 Server User Manual
Page 34
Advertising
Hardware options installation 34
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
Power down the server (on page
2.
).
3.
Remove the access panel (on page
4.
Remove the applicable media bay blank ("
5.
Install the tape drive.
6.
Connect the USB tape drive cable to the USB tape drive cable connector on the system board.
7.
Remove the applicable bezel blank from the bezel ("
" on page
8.
Install the access panel (on page
9.
Install the bezel.
Advertising