HP ProLiant ML310 G5 Server - Manual (Page 41)

Hardware options installation 41
6. Close the PCI retainer.
7. Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board.
8. Install the access panel (on page 19 ).
9. Install the bezel (" Remove the bezel " on page 18 ).
10. Power up the server (on page 17 ).
PCI-X extender board
To install the component:
1. Power down the server (on page 17 ).
2. Unlock the bezel (on page 18 ).
3. Remove the access panel (on page 19 ).
4. Remove the system air baffle and PCI card guide (on page 21 ).
5. Install the PCI-X extender board and secure the four T-15 screws.