HP Integrity Superdome 2 Server - Manual (Page 110)

and write them down. When looking at the enclosure from the rear, the bay on the left is bay 1,
while the bay on the right is bay 2. When the Active Onboard Administrator transitions to the
Standby Onboard Administrator, the DNS host name and IP addresses remains the same. To
connect to the new Active Onboard Administrator, you must completely close your browser and
connect to the host name or IP address of the former Standby Onboard Administrator.
Status, Information, and Virtual Buttons tabs
The information under the Status, Information, and Virtual Buttons tabs is the same as it is for an
active Onboard Administrator. For information on these tabs, see
“Active Onboard Administrator
screen” (page 98) .
TCP/IP Settings for Standby Onboard Administrator
This screen displays the current TCP/IP settings for the Onboard Administrator.
Information
Description Box
The Onboard Administrator MAC address. This is an
informational box and cannot be changed. MAC Address
Static IP address for the Onboard Administrator (required
if static IP settings is selected) IP Address
Subnet mask for the Onboard Administrator (required if
static IP settings is selected) Subnet Mask
Gateway address for the Onboard Administrator (required
if static IP settings is selected) Gateway
The IP address for the primary DNS server DNS Server 1
The IP address for the secondary DNS server DNS Server 2
The name of the Onboard Administrator. The default for
this box is the DNS host name. Onboard Administrator Name (DNS Host Name)
To modify the TCP/IP settings, select Click here.
Standby Onboard Administrator Virtual Buttons tab
The Virtual Buttons tab is the same as it is for an active Onboard Administrator. For information
on this tab, see
“Active Onboard Administrator Virtual Buttons tab” (page 100) .
Standby Certificate Request tab
The standby Certificate Request tab is the same as it is for an active Onboard Administrator. For
information on this tab, see
“Certificate Request tab” (page 103) .
Standby Onboard Administrator Certificate Upload tab
The standby Certificate Upload tab is the same as it is for an active Onboard Administrator. For
information on this tab, see
“Active Onboard Administrator Certificate Upload tab” (page 106) .
110 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices