HP Netserver E Server series - Manual (Page 26)

2 Installing the HP NetServer AutoPilot Software
14
Running the HP AutoPilot Client Installation
Program
After all applications have been closed at the client:
1. Insert the HP NetServer Navigator CD-ROM in your HP AutoPilot Client's CD-
ROM drive, or a network-accessible CD-ROM drive. (If your client doesn't have
access to a CD-ROM drive, you may make floppy masters from the HP NetServer
Navigator CD.)
2. Choose Run from the Windows Program Manager File menu and enter:
x :\autoplt\console\disk1\setup.exe
where x is the CD-ROM drive containing the HP NetServer Navigator CD-ROM.
3. Setup prompts you regarding installation options as shown in the following
screen:
Figure 4: Installation Options Screen
For initial installations, choose the default option,