HP Deskjet 642c Printer - Manual (Page 4)

4
Step 1: Unpack your printer
1 Remove the packing material and the packing tape from the
outside of the printer.
2 Open the top cover and remove the plastic packing material
from the inside of the printer.
3 Close the top cover.
Step 2: Connect parallel cable
You’ll need to buy a printer cable that supports bi-directional
communication (IEEE 1284-compliant), such as HP part number
C2950A.
1 Make sure both the printer and the computer are turned off.
2 Plug the end of the cable that does not have screws attached
into the printer. Snap both clips into the notches.
Tape
Tape
Tape
Tape
Packing material
3
2