Network settings – AltiGen comm 600H User Manual

Page 34

Advertising
background image

Alti-IP 600H Manual 24

Network Settings

Current
AltiWare

System>Current AW

Displays the current AltiWare
server’s IP address assigned to the
phone

Hour Offset

System>Hour Offset

Sets the time offset from the
AltiWare server’s time.

TFTP Server

System>TFTP Server
{Save TFTP Server IP
Address}

Sets the TFTP server IP address for
updating firmware.

Boot
Download

System>Boot
Download

After firmware image upgrade,
submenu changes to {No}. Used
mainly for upgrading or
troubleshooting. On the next boot,
the phone will download the new
firmware from the TFTP server, if
set to [YES].

Note: Make sure to launch

TFTP32.exe.
When downloading, the
phone key pad is disabled.

Emergency
Number

System>Emergency
Num

Sets the IP phone’s emergency
number

Emergency
Gateway

System>Emergency
GW

Sets the IP phone’s emergency
gateway IP address

Version
Information

System>Version
Info {Read only, version
information}

Indicates the version number of the
IP Phone.

Setting

Menu Path {Sub Menu}

Description

Enable DHCP

Network>Enable
DHCP

Set YES or NO to indicate whether
Dynamic Host Configuration
Protocol (DHCP) is being used by the
IP phone to retrieve new IP address
upon boot up.

Advertising