GE GTDP740EDWW - Manual (Page 14)

Installation Instructions

Installation Instructions

:KHQWKHFRYHUFDSDQGGRRUKDQGOHLQSODFHPRXQW
the inner door back into the outer door with the screws
UHPRYHGLQVWHS0DNHVXUH\RXPRXQWWKHKLQJHVRQ
the side opposite the handle.

Remove and swap the cover cap and door handle from
the outer door:
A. Squeeze the tabs on the inside of the door handle
FOLSV3XVKFOLSVWKURXJKWKHRXWHUGRRU
B. Squeeze the tabs on the inside of the cover cap.
3XVKFDSWKURXJKWKHRXWHUGRRU
C.3XVKWKHGRRUKDQGOHFOLSVLQWRWKHRSHQLQJVRQWKH
RSSRVLWHVLGHRIWKHRXWHUGRRUPDNLQJVXUH\RXÀLS
the handle so it curves to the inside.
D.3XVKWKHFRYHUFDSLQWRWKHRSHQLQJVRQWKHRXWHU
door where the handle was removed.

,QVWDOOWKHSODVWLFFDSVUHPRYHGLQVWHSLQWRWKH
right side front panel holes.
NOTE:7RUHWXUQWKHGRRUWRWKHRULJLQDOVHWXSIROORZ
WKHVHLQVWUXFWLRQVVZDSSLQJ´OHIWµDQG´ULJKWµ

Mount the assembled door on the 2 upper left side hinge
screws installed in step 2.
Move the hinge screws loosened in step 3 into the lower
OHIWVLGHVFUHZKROHVDQG¿UPO\WLJKWDOOVFUHZV