GE PSA9240DFWW - Manual (Page 21)

Place the blower unit back into the opening.
WARNING:
5LVNRIHOHFWULFVKRFN
can cause injury or death. Do not pull or stretch
WKHEORZHUXQLWZLULQJ0DNHVXUHWKHZLUHGDUH
not pinched.
7
6
5
ADAPTING BLOWER FOR
RECIRCULATION (continued)
C3
21
Replace blower plate with the screws removed in
Step 1.
Secure blower unit to oven with the 2 screws
removed in Step 2. Insert the screw in bottom right
screw hole on the back of the oven.
Blower Motor
Screw
Installation Instructions
C4
Blower Plate Screws
Back of Oven
CAUTION:
7RDYRLGWKHULVNRISHUVRQDO
LQMXU\ EDFNLQMXU\RURWKHULQMXULHVGXHWRH[FHVVLYH
ZHLJKWRIWKHPLFURZDYHRYHQ RUSURSHUW\GDPDJH
\RXZLOOQHHGWZRSHRSOHWRLQVWDOOWKLVPLFURZDYH
RYHQ
IMPORTANT: Do not grip or use handle during
installation.
WARNING:
5LVNRI(OHFWULF6KRFN&DQ
cause injury or death: If installing unit with metal
FRXQWHUWRSVFRYHUWKHHGJHRIWKHSRZHUVXSSO\
cord hole with the power supply cord bushing.
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
Tur n to Select
P r e s s to E nte r
NOTE: When mounting
the microwave oven,
thread power cord through
hole in bottom of top
cabinet. Keep it tight
throughout Steps 1–3. Do
not pinch cord or lift oven
by pulling cord.
Lift microwave oven,
tilt it forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting plate.
1
2 Rotate front of oven up
against cabinet bottom.
MOUNT THE OVEN