Installation instructions, Change cooktop burner orifices (cont.) – GE PGP986SETSS User Manual

Page 14

Advertising
background image

3

CHANGE COOKTOP BURNER

ORIFICES (CONT.)

14

Installation Instructions

3

CHANGE COOKTOP BURNER

ORIFICES (CONT.)

CENTER BURNER

20,000 BTU/hr Tri-Ring Burner (PGP986 and CGP650

Models)

Orifice spuds located
through these
openings.

V

Main Orifice

Main Orifice

Main Orifice

Simmer Orifice

V

V

V

(Shorter)

51L

58L

58L

58L

LEFT FRONT BURNER
(PGP986 and CGP650 Models)

Main Orifice

Griddle Screw

The griddle screw

is marked with N

for natural gas

and L for liquefied

petroleum.

NOTE: The main orifice is located in the center of

the burner, while the griddle screw is located to the

right of the center of the burner.

D Install the LP Propane orifices and griddle

screw (on PGP986 and CGP650 models only)

in their precise locations as noted in the

earlier illustrations.

E Return the natural gas orifices and griddle

screw to the bracket and attach the bracket

and the instruction sheet to the pressure

regulator using the screw removed previously.

F Replace the burner heads, caps and grates.

Advertising
This manual is related to the following products: