AEG LAVAMAT 72330 - Manual (Page 32)

Instructions for use
32
Washing heavily
creased. Too mush washing probably
put in.
Pay attention to the maxi-
mum filling quantity (see
”Program Tables”). For easy-
care textiles, select the pro-
gram EASY IRON (STRIJKVRIJ,
SANS REPASSAGE).
Washing not well spun.
Residual water still vis-
ible in the drum.
The indicator RINSE
(SPOELEN, RINCAGE)
flashes.
Drainage hose bent. Remove the bend.
Maximum pump head (outlet
head 1m from unit's floor
surface) exceeded.
Consult Customer Service.
They can supply a retrofit kit
as a special accessory for
delivery heads of more than
1m.
Solution pump blocked.
Switch off the unit and pull
out the mains plug. Clean
the solution pump.
If a siphon is connected:
Siphon blocked.
Clean the siphon.
The main door cannot
be opened while the
appliance is turned on.
The main door is locked
because of a high water level
or a high temperature. The
display DOOR (DEUR, PORTE)
is not lit.
Wait until the indicator
DOOR (DEUR, PORTE) lights
up green.
Should it nevertheless be
necessary to open the main
door:
Turn the programme knob to
OFF (UIT, ARRET); turn the
programme knob to PUMP
OUT (POMPEN, VIDANGE).
Press button START/PAUSE
(START/PAUZE, MARCHE/
ARRET). The main door can
be opened after the water
has been pumped out.
Washing detergent res-
idues form in the
washing detergent
drawer.
Water valve not fully opened. Open the water valve fully.
Filter in the screw connec-
tion of the intake hose on
the water valve or on the
unit is blocked. Close the water valve.
Unscrew the intake hose
from the water tap and from
the unit. Clean the filter.
Problem Possible Cause Remedy