GE ZIPS360NZ - Manual (Page 11)

Pan
removal
To remove the pan, pull pan out and, using a
Phillips screwdriver, remove the screws on the
top sides of the pan. Pull up and out on pan. Save
screws.
To replace the pan, extend both left and right
slides, place the pan back onto the slides; there
are hooks on the rear of the slides that the pan
edges will slide under. Lay the pan flat on the
slides - there are two bumps on the slides that
will come through holes on the pan edges to hold
it in place. Using a Phillips screwdriver, replace
the screws on the tops of the pan into the slides.
Push the pan back into position.
Shelves and Bins
Bottom Freezer Refrigerator
11
Adjustable
shelves in the
fresh food
compartment
Tempered glass shelves in the fresh food
compartment enable you to make efficient shelf
arrangements to fit your family’s food storage
needs.
To remove shelves: Tilt shelf up at front,
then lift it up and out of tracks on rear wall of
refrigerator.
To replace shelves: Select desired shelf height.
With shelf front raised slightly, engage top lugs
in tracks at rear of cabinet. Then lower front of
shelf until it locks into position.
Door
bins
Some door bins are adjustable and can be
moved up and down to meet your storage needs.
NOTE:
The deeper door bins must be placed at
the bottom of the door only.
To remove: Lift the bin up and slide it toward you.
Phillips screws
Hook
Bump and
hole