GE ZFGP21HZSS - Manual (Page 8)

Installation Instructions
BOTTOM DRAWER
REMOVE THE 2-PIECE BASKET
A. Open the bottom freezer drawer until it stops.
B. The freezer basket rests on the metal slide brackets
and is held in place with swing locks.
C. Ture the swing locks from vertical to horizontal posi-
tion.
D. Lift the front of the basket up, rotate it towards you, and
bring it straight up to remove.
E. Lift the back portion of the basket up and out of the
drawer.
REMOVE THE BOTTOM DRAWER FROM THE
SLIDES
A.
Remove the hex head screws from each side of the
rail assembly.
B. Remove the four screws attaching the slide brackets
to the connector brackets.
C. Remove the connector brackets and place
aside.
D.
Tilt the bottom drawer toward the refrigerator and
lift out.
E. Set the bottom drawer on a non-scratching
surface.
F.
Push the rail assemblies back into the
cabinet.
STEP 5 REMOVE THE FRESH
FOOD DOORS
The top cap must be removed to access hinges.
It is best to remove one door at a time.
A. Remove 2 screws on top and 2 screws at the back
of the top cap. Lift off top cap.
B. Remove 2 screws holding top hinge to the case.
Carefully lift off left and right side doors.
8
STEP 4 REMOVE THE FREEZER
DRAWERS (CONT.)
Top
Hinge
Top Cap Screws
A
screws