GE ZV925SLSS - Manual (Page 24)

24
Installation Instructions
,167$//$7,21³5(&,5&8/$7,1*
STEP 13 INSTALL LOWER DUCT COVER
• Place rear duct cover onto the hood.
• Place front duct cover onto the hood.
• Secure the duct covers with 6 screws.
Front bottom duct cover section
(snap into place and secure with
6 screws – 3 per side)
Plan
diagram top
view
Front bottom duct
cover sections
STEP 14 INSTALL DUCT COVER TRIM
• Install side brackets to secure the lower duct
tightly against the upper duct.
• Hold lower trim strips (narrow pieces) with hooks
facing down. Place the hooks inside the slots and
slide downward.
• Select the correct size upper trim strips and press
into place.
Upper
trim
strip
Lower
trim strip
Lower
trim
strip
Upper
trim
strip
Side
bracket