Ayre Acoustics P-5XE - Manual (Page 6)

connectors, there are two choices for making the
proper connection:
1) Use custom phono cables with XLR connectors at
the phono preamplifier end and the appropriate
connector (RCA or DIN, depending on the
particular installation) at the turntable end. This is
the preferred solution and offers the highest level of
sound quality, or;
2) Use the existing cables with RCA connectors to
connect to the unbalanced inputs of the P-5xe.
Custom phono cables with XLR connectors for
balanced operation are available from your local
Ayre dealer.
A small toggle switch near the input connectors
configures the circuit for either the balanced or
unbalanced inputs.
Only one set of inputs (balanced or
unbalanced) may be connected at a
time.
4
Input
Output
Input
Output
P-5x Phono Preamplifier
A y r e
Boulder, Colorado USA
S.N.
Volts
50/60 Hertz
10 W Max
Unbal Unbal
47k
100 1000
47k
1000 100
Gain Settings Inside
Bal Bal