GE ZDIS150ZSS - Manual (Page 6)

Controls and Features
Ice maker
Remove
packaging
IMPORTANT: Do not remove any permanent
instruction labels inside your ice maker or the
Tech Sheet that is fastened behind the lower
access panel.
‡5HPRYHWDSHDQGDQ\ODEHOVIURP\RXU
ice maker before using (except the model and
serial number label).
To remove any remaining tape or glue, rub
the area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing
a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm
water and dry.
‡'RQRWXVHVKDUSLQVWUXPHQWVUXEELQJDOFRKRO
flammable fluids or abrasive cleaners to
remove tape or glue. These products can
damage the surface of your ice maker. For
more information, see Important Safety
Instructions .
Set controls
ON/OFF
Press ON/OFF to start ice production or stop ice
maker operation. When the ice maker is in ON
mode, ice production is in progress and the ON/
OFF LED light will be on. When ice maker is in OFF
mode and ice maker operations are turned off,
the ON/OFF LED will remain off.
When ice production is turned on, the ice maker
will automatically enter Quick Ice Mode for the
first 24 hours.
NOTE: Allow 24 hours to produce the first batch
of ice after installing ice maker. Discard the first
two batches produced after installation.
NOTE: Power to the ice maker is not shut off
when the ice maker is in OFF mode.
To stop ice maker operation, press ON/OFF.
48,&.,&(02'(
Press QUICK ICE to start or stop more rapid ice
production. Select the QUICK ICE feature when
you have an upcoming need for a large amount
of ice and the bin is low or empty. Quick Ice
Mode will produce a greater quantity of ice in a
24-hour period.
The QUICK ICE indicator light is illuminated when
the ice maker is in Quick Ice Mode.
Pressing QUICK ICE to turn Quick Ice Mode off will
not stop ice production.
&/($1
It is recommended that you clean the ice maker
if the CLEANING NEEDED light is illuminated, if 6
months have elapsed since the last cleaning, or
if ice production decreases significantly. To clean
your ice maker, see Care and Cleaning -- Cleaning
Cycle.
Clean before
using
After you remove all of the packaging materials,
clean the inside of your ice maker before using it. See the cleaning instructions in Care and
Cleaning.
CLEAN
CLEANING DONE
CLEANING NEEDED
REPLACE
FILTER
ADD CLEANER
TURN UNIT OFF BEFORE CLEANING
SEE USE AND CARE MANUAL
QUICK ICE ON/OFF
6