Getting started – Airlink101 AICN1500W User Manual
Page 3
Advertising
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, including the bundled software SkyIPCam
UltraView, please refer to the User’s Manual on the supplied CD.
Getting Started
Step 1.1
Attach the included external antenna to the camera.
Step 1.2
Connect one end of the Ethernet cable to the IP Camera and connect
the other end to one of the LAN ports on your router or switch.
Step 1.3
Power on the IP Camera by connecting one end of supplied power
adapter to the power jack of the Camera and connecting the other end to the
electrical outlet.
Step 1.4
Verify that the yellow light (Power) is solid and the green light (Link) is
blinking.
Section 1
Advertising