Configuring the camera – Airlink101 AICN1500W User Manual
Page 7
Advertising
Configuring the Camera
Step 3.1
Go to Start > (All) Programs > Airlink101 SkyIPCam UltraView >
SkyIPCam Utility.
Step 3.2
Click on Search to find the camera on your network. Select the
Camera you wish to configure and click on Link.
Note
If the Camera you wish to configure does not show up in the utility, make
sure the camera is properly connected to the same local network as your
computer is, and the Green LED should be on. Click on Search to try again.
Section 3
Advertising